|
| |
|
|
Continual double-helicoidal mixer
Černý, Jan ; Malach, František (referee) ; Malášek, Jiří (advisor)
This work focuses on the process of mixing particulate materials and the design of the screw mixer for this activity. The theoretical part describes the mixing and properties of particulate matter. Subsequently, individual devices serving for different types of mixing are analyzed. The practical part contains calculations of the main dimensions and the required power consumption. The choice of suitable drive, bearings and gear is followed. Finally, the analysis of the blade shaft load and the strength analysis of the mixer blade using Autodesk Inventor are performed. Part of this work is enclosed drawing documentation of equipment assembly and selected partial components.
|
|
|
Two shaft continuous mixer
Lukuvka, Šimon ; Malach, František (referee) ; Malášek, Jiří (advisor)
This diploma project solves questions of blending processes and mixers of partikular materials. In the first and the second part is solved theoreticel analysis of blending processes. Contain of the third and the fourth part is designing and calculating of the mixer´s parameters.
|
|
| |
|
|
Continual double-helicoidal mixer
Černý, Jan ; Malach, František (referee) ; Malášek, Jiří (advisor)
This work focuses on the process of mixing particulate materials and the design of the screw mixer for this activity. The theoretical part describes the mixing and properties of particulate matter. Subsequently, individual devices serving for different types of mixing are analyzed. The practical part contains calculations of the main dimensions and the required power consumption. The choice of suitable drive, bearings and gear is followed. Finally, the analysis of the blade shaft load and the strength analysis of the mixer blade using Autodesk Inventor are performed. Part of this work is enclosed drawing documentation of equipment assembly and selected partial components.
|
|
|
Study of influence of hydrophilic carriers on the solubility of a poorly soluble drug
Veselá, Eliška ; Šklubalová, Zdeňka (advisor) ; Vraníková, Barbora (referee)
Charles University, Faculty of Pharmacy in Hradec Králové Department of: Department of Pharmaceutical Technology Supervisor: Doc. PharmDr. Zdeňka Šklubalová, Ph.D. Consultant: Mgr. Jana Brokešová Student: Eliška Veselá Title of Thesis: Study of influence of hydrophilic carriers on the solubility of a poorly soluble drug The aim of this thesis was to enhance the solubility of a poorly soluble model drug meloxicam (MLX) by preparing binary interactive mixtures with hydrophilic carriers by simple mixing and co-milling. The mixtures were characterized for granulometric properties. The dissolution studies were carried out using the USP-4 apparatus assembled with a flow-through powder cell in an open-loop system. The dissolution rate rrel (min-1 ) and the amount of released drug mrel (%) were evaluated. The observable positive effect of carriers was registerred in terms of increasing the dissolution rate and the amount of released drug for both mixed and co-milled mixtures comparing to the raw drug. Mixtures with hypromellose were the exception; the improvement of the monitored parameters was not detected.
|
|
|
Study of influence of hydrophilic carriers on the solubility of a poorly soluble drug
Veselá, Eliška ; Šklubalová, Zdeňka (advisor) ; Vraníková, Barbora (referee)
Charles University, Faculty of Pharmacy in Hradec Králové Department of: Department of Pharmaceutical Technology Supervisor: Doc. PharmDr. Zdeňka Šklubalová, Ph.D. Consultant: Mgr. Jana Brokešová Student: Eliška Veselá Title of Thesis: Study of influence of hydrophilic carriers on the solubility of a poorly soluble drug The aim of this thesis was to enhance the solubility of a poorly soluble model drug meloxicam (MLX) by preparing binary interactive mixtures with hydrophilic carriers by simple mixing and co-milling. The mixtures were characterized for granulometric properties. The dissolution studies were carried out using the USP-4 apparatus assembled with a flow-through powder cell in an open-loop system. The dissolution rate rrel (min-1 ) and the amount of released drug mrel (%) were evaluated. The observable positive effect of carriers was registerred in terms of increasing the dissolution rate and the amount of released drug for both mixed and co-milled mixtures comparing to the raw drug. Mixtures with hypromellose were the exception; the improvement of the monitored parameters was not detected.
|
|
|
Continual double-helicoidal mixer
Černý, Jan ; Malach, František (referee) ; Malášek, Jiří (advisor)
This work focuses on the process of mixing particulate materials and the design of the screw mixer for this activity. The theoretical part describes the mixing and properties of particulate matter. Subsequently, individual devices serving for different types of mixing are analyzed. The practical part contains calculations of the main dimensions and the required power consumption. The choice of suitable drive, bearings and gear is followed. Finally, the analysis of the blade shaft load and the strength analysis of the mixer blade using Autodesk Inventor are performed. Part of this work is enclosed drawing documentation of equipment assembly and selected partial components.
|
|
|
Continual double-helicoidal mixer
Černý, Jan ; Malach, František (referee) ; Malášek, Jiří (advisor)
This work focuses on the process of mixing particulate materials and the design of the screw mixer for this activity. The theoretical part describes the mixing and properties of particulate matter. Subsequently, individual devices serving for different types of mixing are analyzed. The practical part contains calculations of the main dimensions and the required power consumption. The choice of suitable drive, bearings and gear is followed. Finally, the analysis of the blade shaft load and the strength analysis of the mixer blade using Autodesk Inventor are performed. Part of this work is enclosed drawing documentation of equipment assembly and selected partial components.
|
|
|
Studium technologie výroby vín typu "ryšák"
Štefanov, Martin
The submitted thesis was focused on the study of redhead wines. In the experiment, wines of the redhead type were made using the technology of mixing of must and mixing of mash. For both variants, wines with different proportions of white and blue varieties were created. It was a variant of 75 % of the white variety to 25 % of the blue variety, 50 % of the two varieties and the third variant was 25 % of the white variety to 75 % of the blue variety. Pinot Blanc variety was used for the experiment for a white varieties and the Zweigeltrebe variety was used for the experiment for blue varieties. It also produced classic white and red wine from the varieties. Sensory analysis was performed on wines. Basic analytical parameters (alcohol, titratable acids, reducing sugars, pH and glycerol), antiradical activity and phenolic compounds (anthocyanins, flavanols, flavonols, hydroxycinnamic acids) were also measured. The results show the fundamental impact of maceration of the solids of the berries on the resulting wines, followed by the influence of the variety used. Wines produced by maceration of mashes contained higher values of phenolic substances than wines produced by fermentation of musts.
|
guest ::
